PILOT MC3310

首頁
向上
Contact Us 聯繫我們
Amphenol 軍規接頭 軍用接頭 軍規電纜 軍用電纜 各式特殊電纜製作
CCC 馬達控制
Datel 資料擷取模組
IOtech 專業量測儀器
MccDaq 資料擷取
PDI 振盪器/濾波器
Recom電源轉換器
Semtech 軍規二極體
Ultravolt 高壓電源
智慧電網 IEC 61850
學生套件
產品型錄查詢
Buy Stock 庫存出清

PILOTTM MOTION PROCESSOR FOR BRUSHLESS SERVO MOTION CONTROL MC3310

Brushless Motor DOCUMENTATION

Features

  • Available in 1-axis configuration.
  • 6-step (Hall-based) or sinusoidal commutation.
  • Supports 2 or 3-phase brushless motors.
  • Motion profiles include S-curve, trapezoidal, velocity contouring and user-defined.
  • Asymmetric acceleration and deceleration to custom program a trapezoidal motion profile.
  • Advanced PID filter with velocity and acceleration feedforward, bias offset and 32-bit position error.
  • Velocity and acceleration changes on-the-fly for trapezoidal and velocity contouring profiles.
  • Incremental encoder quadrature input and parallel input for absolute encoder or resolver.
  • Parallel and Serial (point-to-point or multi-drop) communications interface.
  • Trace capabilities for system performance checks, servo-tuning, maintenance and diagnostics.
  • 9-bit, 20kHz PWM or 16-bit DAC motor control output to amplifier.
  • Advanced breakpoint capability allows precise sequencing of events.
  • PLC-style programmable inputs and outputs, including one programmable input and one output.
  • 256 16-bit word I/O locations for user defined peripherals.
  • 8 general-purpose analog inputs.
  • Two-directional limit switches, index input and home indicator.
  • Axis settled indicator and tracking window in addition to automatic motion error detection.
  • Comprised of a single 132-pin device (surface mount CMOS technology).
  • Available in commercial and industrial temperature versions.

Product Description

The PilotTM single-axis, single chip motion processor for brushless servo motor control is ideal for embedded systems for industrial control, automation and robotic applications. The chip is a 132-pin device, surface mount CMOS technology and powered by 5 volts. The motion processor is driven by a host microprocessor through an asynchronous bi-directional serial port or through a 16-bit microprocessor-style parallel interface, giving users the ability to offload resource intensive motion control functions from the application’s host.

The MC3310 provides sinusoidal commutation of 2 or 3-phase brushless motors. Initialization is achieved using Hall-based sensors or with the motion processor’s own algorithm. In addition, the chip accepts incremental quadrature encoder signals for position input and outputs the sinusoidally commutated motor signals. The motion processor has a pre-programmed PID filter with feedforward velocity and acceleration that can be scaled and a bias offset. The chip also supports a 32-bit position error. The PID filter operates at 150 µsec loop cycle time. Trace capabilities provide on-the-fly data storage to an external RAM for analyzing system performance, tuning servo filters and performing maintenance and diagnostics.

With over 150 commands, PMD’s instruction set offers flexibility and versatility to board designers and software applications programmers. Instructions are used to initialize and control the motion processor. User selectable profiling modes supported by the motion processor include S-curve, trapezoidal, velocity contouring and user-defined. The MC3310 accepts input parameters such as position, velocity and acceleration from the host and generates a corresponding trajectory.

The motion processor accepts feedback from an incremental encoder at 5 megacounts per second or from an absolute encoder or resolver at 160 megacounts per second. 16-bit DAC or 9-bit, 20kHz PWM compatible output signals are supported.

Multiple breakpoints offer precise sequencing and control of events by the application program. PLC-style instructions are provided, which operate on inputs and set outputs. The instructions use Event, Activity and Signal registers. Input signals include two limit switches (one for each direction of travel), home indicator and a general-purpose programmable input. One general-purpose programmable output signal is also provided. Eight general-purpose analog (0-5 V), and 256 (16-bit wide) general-purpose discrete inputs/outputs are available.

[首頁] [向上] [Contact Us 聯繫我們] [Amphenol 軍規接頭 軍用接頭 軍規電纜 軍用電纜 各式特殊電纜製作] [CCC 馬達控制] [Datel 資料擷取模組] [IOtech 專業量測儀器] [MccDaq 資料擷取] [PDI 振盪器/濾波器] [Recom電源轉換器] [Semtech 軍規二極體] [Ultravolt 高壓電源] [智慧電網 IEC 61850] [學生套件] [產品型錄查詢] [Buy Stock 庫存出清]


    

新 北 市 汐 止 區 康 寧 街 169 巷 23 號 7 樓 之 一

公司電話:+886-2-2695-8906(代表號)

 02-2695-6755, 02-2695-7011, 02-2695-7033

公司傳真:+886-2-26958911

上次更新日期: 2015年07月03日。