NAVIGATOR MC2300

首頁
向上
Contact Us 聯繫我們
Amphenol 軍規接頭 軍用接頭 軍規電纜 軍用電纜 各式特殊電纜製作
CCC 馬達控制
Datel 資料擷取模組
IOtech 專業量測儀器
MccDaq 資料擷取
PDI 振盪器/濾波器
Recom電源轉換器
Semtech 軍規二極體
Ultravolt 高壓電源
智慧電網 IEC 61850
學生套件
產品型錄查詢
Buy Stock 庫存出清

NAVIGATORTM MOTION PROCESSOR MC2300 SERIES FOR BRUSHLESS SERVO MOTION CONTROL

Brushless Servo DOCUMENTATION

Features

  • 6-step (Hall based) or sinusoidal commutation.
  • Supports 2 or 3-phase brushless motors.
  • Available in 1, 2 and 4-axis versions.
  • Motion profiles include S-curve, trapezoidal, velocity contouring and electronic gearing.
  • Asymmetric acceleration and deceleration to custom program a trapezoidal motion profile.
  • Advanced PID filter with velocity and acceleration feedforward, bias offset and 32-bit position error.
  • Velocity and acceleration changes on-the-fly for trapezoidal and velocity-contouring profiles.
  • Incremental encoder quadrature input and parallel input for absolute encoder or resolver.
  • Parallel and serial (point-to-point or multi-drop) communications interface.
  • Trace capabilities for system performance checks, servo-tuning, maintenance and diagnostics.
  • Encoder rate of 5.0 Mcounts/sec allows use of fine resolution feedback devices.
  • 10-bit 20 kHz PWM or 16-bit DAC motor control output to amplifier.
  • Advanced breakpoint capability allows precise sequencing of events.
  • PLC-style programmable inputs and outputs, including a per-axis programmable input and output.
  • 256 16-bit word I/O locations for user defined peripherals.
  • 8 general-purpose 10-bit analog inputs.
  • Two-directional limit switches, index input and home indicator per axis.
  • Axis settled indicator and tracking window in addition to automatic motion error detection.
  • Packaged in a 132-pin processor and a 100-pin logic device (surface mount CMOS technology).
  • Available in commercial and industrial temperature versions.
  • Software backward compatible with PMD's MC1xxx family (1200 and 1100 series).
     

Product Description

The NavigatorTM Brushless Servo Motion Processor (MC2300 Series) is used in embedded control systems for industrial control, automation and robotic applications. Available in one (MC2310), two (MC2320) and four (MC2340) axis configurations, the MC23xx consists of two components, a 132-pin processor and a 100-pin logic device. Both components are surface mount CMOS technology and powered by 5 volts. The motion processor is driven by a host microprocessor via an 8-bit or 16-bit bus interface or through an asynchronous bi-directional serial port, giving users the ability to offload resource intensive motion control functions from the application's host. The MC2300 Series provides sinusoidal commutation of 2 or 3-phased brushless motors. Initialization is achieved using Hall-based sensors or with the motion processors own algorithm. The MC23xx accepts incremental quadrature encoder signals for input and outputs the sinusoidally commutated motor signals. The MC23xx has a pre-programmed PID filter with feedforward velocity and acceleration that can be scaled, has a bias offset and supports a 32-bit position error. The PID filter operates at 150 µsec loop cycle time per enabled axis. Trace capabilities provide on-the-fly data storage to an external RAM for analyzing system performance, tuning servo filters and performing maintenance and diagnostics. With over 130 commands, PMD's instruction set offers flexibility and versatility to board designers and software application programmers.

Instructions are used to initialize and control the motion processor. User selectable profiling modes supported by the motion processor include S-curve, trapezoidal, velocity contouring and electronic gearing. The MC23xx accepts input parameters such as position, velocity and acceleration from the host and generates a corresponding trajectory. The motion processor accepts feedback from an incremental encoder, up to 5 Mcounts per second, or from an absolute encoder or resolver, up to 160 Mcounts per second. Each axis supports 16-bit DAC or 10-bit, 20 kHz PWM compatible output signals. Each axis can also interface to a quadrature encoder with an optional index pulse, or to a paral-lel- word device, such as an absolute encoder, to provide a position feedback signal. Multiple breakpoints per axis offer precise sequencing and control of events by the application program. PLC-style instructions are provided, which operate on inputs and set outputs. The instructions use Event, Activity and Signal registers. Input signals include two limit switches (one for each direction of travel), home indicator and a general-purpose programmable input per axis. One general-purpose programmable output signal is also provided per axis. Eight general-purpose analog inputs (0-5 V), and 256 (16-bit wide) general-purpose discrete inputs/outputs are available. 

[首頁] [向上] [Contact Us 聯繫我們] [Amphenol 軍規接頭 軍用接頭 軍規電纜 軍用電纜 各式特殊電纜製作] [CCC 馬達控制] [Datel 資料擷取模組] [IOtech 專業量測儀器] [MccDaq 資料擷取] [PDI 振盪器/濾波器] [Recom電源轉換器] [Semtech 軍規二極體] [Ultravolt 高壓電源] [智慧電網 IEC 61850] [學生套件] [產品型錄查詢] [Buy Stock 庫存出清]


    

新 北 市 汐 止 區 康 寧 街 169 巷 23 號 7 樓 之 一

公司電話:+886-2-2695-8906(代表號)

 02-2695-6755, 02-2695-7011, 02-2695-7033

公司傳真:+886-2-26958911

上次更新日期: 2015年07月03日。