PILOT MC3510

首頁
向上
Contact Us 聯繫我們
Amphenol 軍規接頭 軍用接頭 軍規電纜 軍用電纜 各式特殊電纜製作
CCC 馬達控制
Datel 資料擷取模組
IOtech 專業量測儀器
MccDaq 資料擷取
PDI 振盪器/濾波器
Recom電源轉換器
Semtech 軍規二極體
Ultravolt 高壓電源
智慧電網 IEC 61850
學生套件
產品型錄查詢
Buy Stock 庫存出清

PILOTTM MOTION PROCESSOR FOR STEPPING MOTION CONTROL MC3510

Industrial Motor Control DOCUMENTATION

Features

  • Available in 1-axis configuration.
  • Pulse and direction output (up to 50 kpulses/sec).
  • Motion profiles include S-curve, trapezoidal, velocity contouring and user-defined.
  • Asymmetric acceleration and deceleration to custom program a trapezoidal motion profile.
  • Velocity and acceleration changes on-the-fly for trapezoidal and velocity contouring profiles.
  • Incremental encoder quadrature input and parallel input for absolute encoder or resolver
    for on-the-fly motor stall detection.
  • Parallel and Serial (point-to-point or multi-drop) communications interface.
  • Trace capabilities for system performance checks, maintenance, and diagnostics.
  • Encoder rate of 5.0 Mcounts/sec allows use of fine resolution feedback devices for reading motor position.
  • Advanced breakpoint capability allows precise sequencing of events.
  • PLC-style programmable inputs and outputs, including a per-axis programmable input and output.
  • 256 16-bit word I/O locations for user-defined peripherals.
  • 8 general-purpose 10-bit analog inputs.
  • Two directional limit switches, index input, home and at-rest indicator.
  • Axis settled indicator and tracking window in addition to automatic motion error detection.
  • Packaged in a 132-pin device (surface mount CMOS technology).
  • Available in commercial and industrial temperature versions.

Product Description

The PilotTM MC3510 single-axis, single chip motion processor for step motor control is ideal for embedded systems in industrial control, automation and robotic applications. The chip is a 132-pin device, surface mount CMOS technology and powered by 5 volts. The motion processor is driven by a host microprocessor through an asynchronous bi-directional serial port or through a 16-bit microprocessor-style parallel interface, giving users the ability to offload resource intensive motion control functions from the application’s host.

The MC3510 offers high performance, programmable pulse and direction output at up to 50 Kpulses/sec. The chip operates in an open loop mode where the motor command is driven from the output of the trajectory generator. Optional encoder feedback provides on-the-fly motor stall detection and allows the chip to detect when the step motor has lost steps during a motion. Trace capabilities provide on-the-fly data storage for analyzing system performance and performing maintenance and diagnostics.

With over 120 commands, PMD’s instructions set offers flexibility and versatility to board designers and software application programmers. Instructions are used to initialize and control the motion processor. User-selectable profiling modes supported by the motion processor include S-curve, trapezoidal, velocity contouring and user-defined. The MC3510 accepts input parameters such as position, velocity and acceleration from the host and generates a corresponding trajectory.

The motion processor accepts feedback from an incremental encoder, up to 5 megacounts per second or from an absolute encoder or resolver, up to 160 megacounts per second, to read the current position.

Multiple breakpoints offer precise sequencing and control of events by the application program. PLC-style instructions are provided, which operate on inputs and set outputs. The instructions use Event, Activity and Signal registers. Input signals include two limit switches (one for each direction of travel), home indicator and a general-purpose programmable input. An at-rest output signal is provided, along with one general-purpose programmable output signal. Eight general-purpose analog (0-5 V) and 256 (16-bit wide) general-purpose discrete inputs/outputs are available.

[首頁] [向上] [Contact Us 聯繫我們] [Amphenol 軍規接頭 軍用接頭 軍規電纜 軍用電纜 各式特殊電纜製作] [CCC 馬達控制] [Datel 資料擷取模組] [IOtech 專業量測儀器] [MccDaq 資料擷取] [PDI 振盪器/濾波器] [Recom電源轉換器] [Semtech 軍規二極體] [Ultravolt 高壓電源] [智慧電網 IEC 61850] [學生套件] [產品型錄查詢] [Buy Stock 庫存出清]


    

新 北 市 汐 止 區 康 寧 街 169 巷 23 號 7 樓 之 一

公司電話:+886-2-2695-8906(代表號)

 02-2695-6755, 02-2695-7011, 02-2695-7033

公司傳真:+886-2-26958911

上次更新日期: 2015年07月03日。