Contact Us 聯繫我們
Amphenol 軍規接頭 軍用接頭 軍規電纜 軍用電纜 各式特殊電纜製作
CCC 馬達控制
Datel 資料擷取模組
IOtech 專業量測儀器
MccDaq 資料擷取
PDI 振盪器/濾波器
Semtech 軍規二極體
Ultravolt 高壓電源
智慧電網 IEC 61850
Buy Stock 庫存出清


Advanced Motion Control DOCUMENTATION


  • Available in 1, 2 and 4-axis versions.
  • High Speed (up to 5 M-pulses/sec) pulse and direction output.
  • Motion profiles include S-curve, trapezoidal, velocity contouring and electronic gearing.
  • Asymmetric acceleration and deceleration to custom program a trapezoidal motion profile.
  • Velocity and acceleration changes on-the-fly for trapezoidal and velocity-contouring profiles.
  • Incremental encoder quadrature input and parallel input for absolute encoder or resolver for on-the-fly motor stall detection.
  • Parallel and serial (point-to-point or multi-drop) communications interface.
  • Trace capabilities for system performance checks, maintenance and diagnostics.
  • Encoder rate of 5.0 Mcounts/sec allows use of fine resolution feedback devices for reading motor position.
  • Advanced breakpoint capability allows precise sequencing of events.
  • PLC-style programmable inputs and outputs, including a per-axis programmable input and output.
  • 256 16-bit word I/O locations for user-defined peripherals.
  • 8 general-purpose 10-bit analog inputs.
  • Two-directional limit switches, index input and home indicator per axis.
  • Axis settled indicator and tracking window in addition to stall detection.
  • Packaged in a 132-pin processor and a 100-pin logic device (surface mount CMOS technology).
  • Available in commercial and industrial temperature versions.
  • Software backward compatible with PMD's MC1xxx family (1451, 1251 and 1151 series).

Product Description

The NavigatorTM Stepping Motion Processor (MC2500 Series) is used in embedded control systems for industrial motion control, automation and robotic applications. Available in one (MC2510), two (MC2520) and four (MC2540) axis configurations, the MC25xx consists of two components, a 132-pin processor and a 100-pin logic device. Both components are surface mount CMOS technology and powered by 5 volts. The motion processor is driven by a host microprocessor via an 8-bit or 16-bit bus interface or through an asynchronous bi-directional serial port, giving users the ability to offload resource intensive motion control functions from the application’s host. The MC2500 Series offers high speed, programmable pulse and direction output at up to 5 M-pulses/sec. The motion processor operates in an open loop mode where the pulse generator is driven from output of the trajectory generator. Optional encoder feedback provides on-the-fly motor stall detection and allows the chipset to detect when the stepping motor has lost steps during a motion. Trace capabilities provide on-the-fly data storage for analyzing system performance and performing maintenance and diagnostics. With over 110 commands, PMD’s instruction set offers flexibility and versatility.

Instructions are used to initialize and control the motion processor. User selectable profiling modes supported by the motion processor include S-curve, trapezoidal, velocity contouring and electronic gearing. The MC25xx accepts input parameters such as position, velocity and acceleration from the host and generates a corresponding trajectory. The motion processor accepts feedback from an incremental encoder, up to 5 megacounts per second, or from an absolute encoder or resolver, up to 160 megacounts per second, to read the current axis position. Multiple breakpoints per axis offer precise sequencing and control of events by the application program. PLC-style instructions are provided, which operate on inputs and set outputs. The instructions use Event, Activity and Signal registers. Input signals include two limit switches (one for each direction of travel), home indicator, and a general-purpose programmable input per axis. One general-purpose programmable output signal is also provided per axis. Eight general-purpose analog (0-5 V) and 256 (16-bit wide) general-purpose discrete inputs/outputs are available.

[首頁] [向上] [Contact Us 聯繫我們] [Amphenol 軍規接頭 軍用接頭 軍規電纜 軍用電纜 各式特殊電纜製作] [CCC 馬達控制] [Datel 資料擷取模組] [IOtech 專業量測儀器] [MccDaq 資料擷取] [PDI 振盪器/濾波器] [Recom電源轉換器] [Semtech 軍規二極體] [Ultravolt 高壓電源] [智慧電網 IEC 61850] [學生套件] [產品型錄查詢] [Buy Stock 庫存出清]


新 北 市 汐 止 區 康 寧 街 169 巷 23 號 7 樓 之 一


 02-2695-6755, 02-2695-7011, 02-2695-7033


上次更新日期: 2015年07月03日。