CCC 馬達控制

首頁
Contact Us 聯繫我們
Amphenol 軍規接頭 軍用接頭 軍規電纜 軍用電纜 各式特殊電纜製作
CCC 馬達控制
Datel 資料擷取模組
IOtech 專業量測儀器
MccDaq 資料擷取
PDI 振盪器/濾波器
PMD 馬達控制
Recom電源轉換器
Semtech 軍規二極體
Ultravolt 高壓電源
智慧電網 IEC 61850
學生套件
產品型錄查詢
Buy Stock 庫存出清

LogoComputer Conversions Corporation Welcome to Computer Conversions Corporation distributor website in Taiwan – Bentech

Computer Conversions Corporation over 30 years engaged in the design, manufacture, and sale of resolver / synchro / lvdt converters for Industrial, Military, and commercial concerns. Broadest line of isolated converters in the marketplace, resolvers, geared resolvers, rotary Absolute Encoders and readouts, Incremental and Absolute Encoders, Programmable Limit Switch Controls, and an entire line of VME, ISA, PC104, STD bus compliant isolated converter modules, and cards. Quality assurance program conforms to MIL-I-45208. Specialty high reliable position feedback sensors and interface, absolute position retrofits, environmentally tolerant, heavy duty and explosion proof position sensors, and Multiturn Absolute Encoders. Bentech is distributor in Taiwan

Synchro - Resolver - Ac LVDT I/O
ISA Bus
PCI-SYNCHROTM SERIES  PC Compatible ISA Bus Cards

 VME Bus Cards  Synchro - Resolver - Ac LVDT I/O
VME Bus12 Channel VME Bus
4 to 8 Channel 12 Channel
Our New - VSP90 Series

 PC104 Bus Cards  Synchro - Resolver - Ac LVDT I/O
PC104 BusPC104 Bus
 PC104 Bus Cards

STD BusSTD BUS

One to 2 Channel cards, any function per card.
Lowest cost I/O bus.
I/O and Memory addressing, Expanded addressing supported.
High/Low Byte priority selectable.
Double Buffered Outputs.
Terminal Blocks or Mil spec. connectors on I/O.


Synchro Amplifiers Synchro Amplifiers And High Power Digital to Synchro Converters

Multispeed High Accuracy Angle IndicatorsMultispeed High Accuracy Angle Indicators

Input: 11.8V/90V rms. L-L, 47 to 10,000 Hz
Ref.: 26V/115V rms. & 115V 60 Hz power.
Speed Ratio: 1, 8, 10, 16, 18, 32, 36, 64 &128.
Output: 5 or 6 digit .5" LED display (uni-polar or bipolar) & 5 or 6 digit BCD digital data (optional).

Accuracy: +-.002, +-.005, or +-.01 degree.
Package: a: 9.5" x 8" x 2" H.  b: 19" x 12" x 3.5" H.
Options: Choice of scale  factor, other speed ratios, watchdog timer, tristate, binary and BCD output data simultaneously, dimmer.

Programmable Limit SwitchProgrammable Limit Switch - Series PLS1000

Input: Single, Multiturn or Linear Resolver.
Resolution: Field Scalable to 1 part in 4096/turn.
Outputs: 16 & 1 fault, field select TTL or DC to 50V, Solid State and Electromechanical relay boards.
Display: 8 character and status LEDs
Speed: 5 us throuput fully loaded, 3000 RPM.

Functions: Hi/Low set points, dwells, timers, tach, cycle count, RS232 I/O, force outputs, offsets, 5 speed advance.
Memory: Nonvolatile EEPROM 10-100 programs, serial buffer.
Size: 7.4"x6.2"x4.5" panel mount or 14"x12"x10" Nema 13.

UNI-CODER™Shaft Tracker™

Absolute & Incremental Outputs. No External Electronics, Ultra-Reliable electromagnetic encoder with Real-Time Incremental Quadrature Square & Serial/Shifted  Absolute Position Data in one. Resolution: 1024-4096 parts/turn. Nema 12, Size 25 std. Flange mount. Single +5VDC, or 10-30VDC power-in. Isolated Multidrop RS485 Differential outputs. Replaces Disposable Opticals.

MultiTurn Shaft Tracker ™
Same features as above.
Available -40 deg c to +85 deg c and Military Grade Extended Temperature-55 deg. c. to +105 deg. c. 4 to 128 turn variations. Resolution: up to 22 bits.

Snaptrak™ EncodersSnaptrak™ Encoders

Resolution 100 to 65,536 parts/turn. Basic full function system, +12 or +15VDC power in, Buffered 5v TTL or Open Collector 5-30VDC logic outputs. All digital output formats, BIN, BCD, Gray Code, Absolute & Incremental available. Remote offset option.

DC Snaptrak units feature analog 0-10VDC, +-10VDC, and 4-20ma. current loop outputs. +12 or 24VDC power in. High reliability electromagnetic (no wear) pot replacers. 1000' long cables. Rotary differentials available too.


Track II™ EncodersTrack II™ Encoders

Value added system, 24VDC power in, field selectable 5, 15, or 24VDC logic level outputs. Opto-Isolated PLC Handshake, Position status LEDs & Remote Zero-set Std. BCD, Binary, Gray Code outputs, Incremental output option. Rotary differentials & Limit Switch available. Resolution: 4096 parts/turn.


Synchro / Resolver SimulatorsSynchro / Resolver Simulators

Input: Up to 18 bits digital parallel binary or 6 digits BCD, or manual 6 digit thumwheel switches
Power: 115V 60 Hz.

Output: 11.8V or 90V rms. L-L 47 to 10,000 Hz capable of driving up to 25 VA loads.
Dynamic Range: .125 to 16 rps.
Display: 5 or 6 digit .5"H LED of input or output angle.
Accuracy: +-.002, +-.005, or +-.01 degrees.
Package:  Bench mount 12"x13"x3.25"H, or Portable case 9"x12"x12" (splash proof).
Options: Multispeed synchro input and bus card interface.

Multiturn Absolute Encoder Systems and ReadoutsMultiturn Absolute Encoder Systems and Readouts

Convert 1 to 1024 turns of shaft rotation input into 1,000 to 4,194,304 unique position locations. These true absolute encoders that retain their position information forever, regardless of any motion during a power outage.

TMDS-PC Series: PC card 4.5"x6.5" & 64, 128, or 1024 turn position transducer, resolution 1024 to 16,384 parts/turn. Buffered +5VDC TTL logic, parallel binary formats, three state & data latch control lines, separate dual data ports opt. +12 or +15VDC power.

TMSAI Series: 5 digit scaled panel mount LED readout, 9.5"Wx2.5"Hx8"D and with a size 23 Nema 12 transducer. Scaled BCD output & 16 bit binary output. 10, 36, 64, 100, 128 turns. 115VAC power.

TMRE-CIM Series: (shown) 1 million part full function readout system, 10,000 parts/turn, 100 turns full range, excellent for rack & pinion systems, adjustable datum point, pushbutton offsets, 5-30VDC BCD outputs, 115VAC power.

TMDS Series: 2-1024 turns, resolution 100 to 65,536 per turn. Outputs optional 4, 5, or 6 digit scaled readouts, operator offset options, panel or rack mount decoders. BCD, binary, analog, gray code, RS232/422/485 serial, pulse-width, or bus compatible outputs, units with incremental & absolute outputs, multi-channel systems too!

Multiturn Transducers available in: Small size 23, heavy duty NEMA 12-4, IP65, explosion proof, water tight, submersibles, motor tach & multiturn resolver assemblies. Radiation resistant units to 1x109 Rads.


Low Cost Angle Indicator

Input: 11.8/90V RMS. L-L, 47 to 10,000 Hz
Ref:26/115V RMS.
Power: 115V 60 Hz.

Output: 11.8V or 90V rms. L-L 47 to 10,000 Hz capable of driving up to 25 VA loads.
Dynamic Range: .125 to 16 rps.
Display: 5 or 6 digit .5"H LED of input or output angle.
Accuracy: +-.002, +-.005, or +-.01 degrees.
Package:  Bench mount 12"x13"x3.25"H, or Portable case 9"x12"x12" (splash proof).
Options: Multispeed synchro input and bus card interface.

Multiplexed Synchro to Digital 4 Channel Input ModuleMultiplexed Synchro to Digital Central Converter Moduleransformer Isolated Multiplexed Synchro to Digital Converter - Series MSI

Input:11.8/90V RMS. L-L 47 to 10,000 Hz, Reference 26/115V RMS., up to 128 channels
Output: 14 Bits parallel binary or 4 decade BCD
Accuracy: +-4.6 minutes of arc +-.5LSB..

Package: (A) Central Converter 2.6"x3.1"x.43"H module.
                 (B) Four channel input module2.6"x3.1"x.43"H module

Options: (A) Scale Factor Choice on BCD output.
                (B) Linear DC output.
                (C) System mounted on PC boards or racks.


High Accuracy Synchro to Digital High Accuracy Synchro to Digital - Series USD

Input: 11.8/90Vrms L-L, 47 to 10,000 Hz.Ref. 26/115V rms. (optional)
Output: 20 bits parallel binary.
Accuracy: +-.005 Degrees.
Package: 2.6"x3.1"x.8"H module.
Option: 6 digit BCD output.


High Accuracy Digital to ResolverHigh Accuracy Digital to Resolver - Series UDR

Input: 18 bits parallel binary and 26/115V 47 to 10,000 Hz reference.
Output: 7V rms., 60 or 400 Hz, capable of driving 2k ohm load.
Accuracy: +-.005 degrees.
Package: 2.6"x3.1"x.8"H module
Option:  (1) 6 Digit BCD input.   (2) Separate power amplifier modules.


Multispeed Synchro to DigitalMultispeed Synchro to Digital in One Module - Series SDT

Input: 11.8/90V rms. L-L, 47 to 10,000 Hz, 26/115V rms. reference.
Speeds: 10, 16, 18, 32, 36, 64.
Output: 16 bits parallel binary and velocity.
Accuracy: +-.01 or +-.005 degrees.
Package: One 2.6"x3.1"x.82"H module.
Options: (A) Systems packaged on PC cards or racks.    (B) 6 Digit Display.


Miniature Synchro / Resolver to DigitalMiniature Synchro / Resolver to Digital - Series HSDC

Input: 18 bits parallel binary and 26/115V 47 to 10,000 Hz reference.
Output: 7V rms., 60 or 400 Hz, capable of driving 2k ohm load.
Accuracy: +-.005 degrees.
Package: 2.6"x3.1"x.8"H module
Option:  (1) 6 Digit BCD input.   (2) Separate power amplifier modules.


Miniature Synchro to Resolver Converters (Scott T Transformers) Series ST
Miniature Synchro to Resolver ConvertersInput: 11.8./90V rms. L-L, 47 to 10,000 Hz. 26/115V rms. reference. (optional)
Output: 6V or 2V rms.
Accuracy: +-1, +-2, +-4 minutes of arc.
Package: 1.3"x1.3"x.4"H.
Compatible with all Monolithic Resolver to Digital Converters

Reference Powered Digital to Synchro / ResolverReference Powered Digital to Synchro / Resolver - Series DSP

Input: 14 or 12 bits parallel binary and 115V rms. reference 47 to 10,000 Hz
Output: 90V L-L 47 to 10,000 Hz capable of driving 4.5 VA.
Accuracy: +- 4 minutes of arc.
Package: 2.6"x3.1"x.82"H.
No external transformer required.


Digital to Synchro / ResolverDigital to Synchro / ResolverDigital to Synchro / Resolver - Series DSC

Input: 10 to 16 bits parallel binary and 26/115V rms. reference.
Output: 11.8/90V rms. L-L, 47 to 10,000 Hz capable of driving 1VA, 2VA, 5VA (up to 3 TRS) or 25VA loads.

Accuracy: 2 to 30 arc minutes.
Package: (A) 2.6"x3.1"x.6:H module.
                 (B) 2.6"x3.1"x.82H module.
                 (C) PC card with edge connector (5VA and 25VA units)

Vector Generator - Series DVG

Input: 14 or 18 bits parallel binary, Reference 10 VDC or 7 V rms.,
and power +-15 VDC
Output: +-10 VDC sine & cosine, DC to 10,000 Hz, 2K ohms minimum load.
Reference Output: 10VDC
Accuracy : to +- 10 arc seconds.
Package: 2.6"x3.1"x.43"H module.

Option: Dynamic Vector Rotators with programmable acceleration and deceleration.

[首頁] [Contact Us 聯繫我們] [Amphenol 軍規接頭 軍用接頭 軍規電纜 軍用電纜 各式特殊電纜製作] [CCC 馬達控制] [Datel 資料擷取模組] [IOtech 專業量測儀器] [MccDaq 資料擷取] [PDI 振盪器/濾波器] [PMD 馬達控制] [Recom電源轉換器] [Semtech 軍規二極體] [Ultravolt 高壓電源] [智慧電網 IEC 61850] [學生套件] [產品型錄查詢] [Buy Stock 庫存出清]


    

新 北 市 汐 止 區 康 寧 街 169 巷 23 號 7 樓 之 一

公司電話:+886-2-2695-8906(代表號)

 02-2695-6755, 02-2695-7011, 02-2695-7033

公司傳真:+886-2-26958911

上次更新日期: 2015年07月03日。